Systems > Sports Systems

 


 
  Sports Industrial
  Decorative Waterproofing (under construction)

 
 Sports Floorings  

SPORTS FLOORINGS GUIDE

*** The basic systems for wet-pour indoor and outdoor sports courts/halls are actually five (four acrylic-based plus one indoor polyurethane-based):

1: RITIVEX 1102 (acrylic white primer) + ELASTOSPORT 853 (a black-colored cement-acrylic-bituminous fluid self-leveling material, which smoothes the surface-applied in at least two layers by squeegee) + ELASTOTURF 851 (the top acrylic colored coating, applied in at least three layers by squeegee). This is the ITF-certified medium-fast hard court system (category 4). 

2: RITIVEX 1102 + ELASTOCOAT 841 (a fluid wet-pour flexible mixture containing acrylic binders, improvers, rubber granules and quartz sand that makes a more flexible substrate-than ELASTOSPORT 853-for ELASTOTURF 851 which will follow-applied in at least two layers by squeegee) + ELASTOTURF 851 system.

3: RITIVEX 1102 + SUPERELASTOCOAT 841 (a fluid wet-pour flexible mixture containing rubber granules without any quartz sand that makes an even more flexible substrate-than ELASTOCOAT-for ELASTOTURF which will follow-applied in at least two layers by squeegee) + ELASTOTURF 851 system. 

4. PU FLEX 140 (polyurethane glue) + ISOPOL 854 (prefabricated cushion shock-pad in different thicknesses) + ELASTOTURF 851system, for even more flexibility than the three previous ones.

*** For all the above systems, in case the substrate is not adequately smooth, we normally use a couple of layers of ELASTOSPORT 853first to level it out and then we proceed with the materials of the chosen system. To be sure, this is the recommended way in every case.

 The most economical acrylic-based solution from the above is RITIVEX 1102 + ELASTOSPORT 853 +ELASTOTURF 851. Somewhere in the middle are our systems with RITIVEX 1102 + ELASTOCOAT 841 + ELASTOTURF 851 and RITIVEX 1102 + SUPERELASTOCOAT 842 + ELASTOTURF 851, which have their cushion layers (ELASTOCOAT 841 or SUPERELASTOCOAT 842) made of an acrylic-based mix of recycled rubber. The most flexible (and most expensive) acrylic-based solution, which is best for multipurpose sports halls (usually indoors) is the PU FLEX 140 + ISOPOL 854 + ELASTOTURF 851 system. Note that for all the above solutions, in case of indoor projects it's always better to use the smooth version of our acrylic ELASTOTURF 851 and cover it optionally with our POLYSPORT MAT 952.

 5. For indoor sports halls, the polyurethane system (PU FLEX 140 + ISOPOL 854 + POLUSPORT STUCCO 950-pore filler +POLYSPORT 951-self leveling polyurethane layer + POLYSPORT MAT 952-mat sealer) is ideal for a flexible multipurpose use.

*** Coming to children’s playgrounds, there are two systems to choose from.  The wet-pour one (SAFEPOL SYSTEM) is certified by the LNE Institute according to EN 1177 and comprises PU BINDER 870 (a polyurethane primer) first, then a mixture of RECYCLED RUBBER 858 and the polyurethane binder PU BINDER 1118 applied on top of it (code name SAFEPOL for the mix), and finally the top mix of colored EPDM 856 and PU BINDER 1118 (code name SAFEPOL MULTICOLOR for the mix), which is the one that gives the endless designs and patterns that make a joyful playground.  The second option is rubber safety tiles (again certified according to EN 1177) placed on the floor with the use of special connectors.

*** For running tracks, there is the POLTRACK system.  It consists of a polyurethane primer (POLAPLAST P10), then a base-coat mixture (11-12mm thick) of RECYCLED RUBBER 858 and the polyurethane binder POLAPLAST P13 and finally a spray coat mixture on top (2mm thick), consisting of EPDM 856 and the colored polyurethane binder POLAPLAST P12.  

*** For football pitches and tennis courts, there is a also a wide range of synthetic turfs to choose form, with different characteristics customized to fit diverse requirements.   

 

 

 

 

 

 

 

 

 

 

 

> For exterior surfaces

> For interior surfaces

> For playgrounds

  

For exterior surfaces
 

SPORTFLOOR-EX

  Material Consumption kg/sq.m.
For total thickness up to 2,2 mm: Ritivex primer 1102    0,2
  Elastosport 853
2
  Elastoturf 851 1,8

RECOMMENDED SUBSTRUCTURE

Asphalt dry surfaces or on dry waterproof non-polished concrete, preferably after light grinding to provide grip and “bite”. 
 

Click here to see the APPLICATION TIPS. 

   

 

FLEXFLOOR-EX

FOR SMOOTH SURFACES
  Material Consumption kg/sq.m.
For total thickness
up to 3,5 mm:
 
Ritivex primer 1102    0,2
Super Elastocoat 842 or ELASTOCOAT 841 in 2mm thickness 
1,3
Elastoturf 851 for 1,5mm thickness 
2,5
FOR NON SMOOTH SURFACES
  Ritivex primer 1102  0,2 
For total thickness
up to 3,5 mm:
 
Elastosport 853  2
Super Elastocoat 842 or ELASTOCOAT 841 in 2mm thickness 
1,3
Elastoturf  851 for 1,5mm thickness 
2,5 

RECOMMENDED SUBSTRUCTURE

Dry asphalt or dry waterproof non-polished concrete, preferably after light grinding to provide grip and “bite”.

Click here to see the APPLICATION TIPS. 

    

  

POLYFLEX AEL-EX  

  Material Consumption kg/sq.m.
For total thickness 6 mm: PU FLEX 140 0,7-0,8
ISOPOL (854) in 4mm thickness
 
Elastoturf 851
2,5
For total thickness
7 mm:
  
PU FLEX 140
0,7-0,8
ISOPOL (854) in 5mm thickness

Elastoturf 851 2,5  
For total thickness
8 mm:
  
FLEX 140 0,7-0,8
ISOPOL (854) in 6mm thickness  
Elastoturf 851  2,5
For total thickness
9 mm:
PU FLEX 140  0,7-0,8
ISOPOL (854) in 7mm thickness  
Elastoturf 851 2,5
For total thickness
10 mm:
 
PU FLEX 140 0,7-0,8
ISOPOL (854) in 8mm thickness  
Elastoturf 851 2,5
For total thickness
12 mm:
PU FLEX 140 0,7-0,8
  ISOPOL (854) in 10mm thickness  
  Elastoturf 851 2,5

RECOMMENDED SUBSTRUCTURE

Dry asphalt or dry waterproof non-polished concrete, preferably after light grinding to provide grip and “bite”.

Click here to see the APPLICATION TIPS. 

  

 

RUNNING TRACK-POLTRACK SPRAY-COAT

 Steps Material Consumption kg/sq.m.
Primer:
POLAPLAST P10 - ONE-COMPONENT POLYURETHANE PRIMER  150-200gr/m2
Base coat (11-12mm): 
POLAPLAST P13 - ONE-COMPONENT POLYURETHANE BINDER  1,08kg/m2
RECYCLED RUBBER 858 1-4mm thickness  6kg/m2
Top spraying coat (1-2mm): 
POLAPLAST P12 - COLORED ONE-COMPONENT POLYURETHANE SPRAY COATING  1,2kg/m2
  EPDM GRANULES 856  1,2kg/m2

RECOMMENDED SUBSTRUCTURE
Dry surfaces, free of materials that might prevent bonding e.g. dust, loose particles etc (in case of asphalt or concrete).

RECOMMENDED USES
Recommended for athletic tracks.

 
Click here to see the APPLICATION TIPS. 

  

 


 For interior surfaces

SPORTFLOOR-ΙΝ

  Material Consumption kg/sq.m.
For total thickness 2,2 mm: Ritivex primer 1102    0,2
  Elastosport 853
2
  Elastoturf 851 S 1,8
  POLYSPORT MAT 952 (optional) 0,2

RECOMMENDED SUBSTRUCTURE

Asphalt dry surfaces or dry waterproof non-polished concrete, preferably after light grinding to provide grip and “bite”.

Click here to see the APPLICATION TIPS. 

   

  

FLEXFLOOR-IN


FOR SMOOTH SURFACES
  Material Consumption kg/sq.m.
For total thickness 3,5 mm: Ritivex primer 1102    0,2
Super Elastocoat 842 or ELASTOCOAT 841 in 2mm thickness  
1,3
Elastoturf  851 for 1,00-1,5mm thickness  2,5
POLYSPORT MAT 952 (optional)   0,2

FOR NON SMOOTH SURFACES 
For total thickness
3,5 mm:
  
Ritivex primer 1102  0,2 
Elastosport 853  2
Super Elastocoat 842 or ELASTOCOAT 841 in 2mm thickness 
1,3
Elastoturf S 851 in 1,00-1,5mm thickness 
2,5 
POLYSPORT MAT 952  (optional)  0,2

RECOMMENDED SUBSTRUCTURE

Dry asphalt or dry waterproof non-polished concrete, preferably after light grinding to provide grip and “bite”.


RECOMMENDED USES
Recommended for outdoor and indoor tennis, basketball, handball, volleyball, multipurpose courts as well as other sports floors.

 
Click here to see the APPLICATION TIPS. 

 

   

 

POLYFLEX AEL-IN

  Material Consumption kg/sq.m.
For total thickness 6 mm:
 
PU FLEX 140  0,7-0,8 
ISOPOL (854) in 4mm thickness 
 
Elastoturf S 851  2,5 
POLYSPORT MAT 952 (optional)    0,2
For total thickness 7 mm: PU FLEX 140   0,7-0,8
ISOPOL (854) in 5mm thickness  
Elastoturf S 851  2,5
POLYSPORT MAT 952 (optional)    0,2
For total thickness 8 mm:  PU FLEX 140   0,7-0,8
ISOPOL (854) in 6mm thickness  
Elastoturf S 851  2,5
POLYSPORT MAT 952 (optional)     0,2
For total thickness 9 mm:   PU FLEX 140  0,7-0,8 
ISOPOL (854) in 7mm thickness   
Elastoturf S 851  2,5 
POLYSPORT MAT 952 (optional)    0,2 
For total thickness 10 mm: 
 
PU FLEX 140  0,7-0,8 
ISOPOL (854) in 8mm thickness   
Elastoturf S 851  2,5 
POLYSPORT MAT 952 (optional)  0,2 
For total thickness 12 mm:   PU FLEX 140  0,7-0,8 
ISOPOL (854) in 10mm thickness  
Elastoturf S 851  2,5 
POLYSPORT MAT 952 (optional)   0,2 

RECOMMENDED SUBSTRUCTURE

Dry asphalt or dry waterproof non-polished concrete, preferably after light grinding to provide grip and “bite”.


RECOMMENDED USES
Recommended substrate for ELASTOTURF 851, ELASTOTURF 851S or POLYSPORT PU 951 for the creation of sports
floorings for indoor and outdoor surfaces like basketball, volleyball, tennis and handball courts as well as for playgrounds
or other sport grounds.


Click here to see the APPLICATION TIPS. 

  

 

POLYFLEX PU

  Material Consumption kg/sq.m.
For total thickness 6 mm: PU FLEX 140  0,7-0,8 
ISOPOL (854) in 4mm thickness  
 
POLYSPORT STUCCO 950 
0,7-0,8 
POLYSPORT PU 951 
2-2.3 
POLYSPORT MAT 952  0.15-0.20 
For total thickness 7 mm: PU FLEX 140   0,7-0,8
ISOPOL (854) in 5mm thickness  
POLYSPORT STUCCO 950  0,7-0,8
POLYSPORT PU 951  2-2.3
POLYSPORT MAT 952  0.15-0.20 
For total thickness 8 mm:  PU FLEX 140   0,7-0,8
ISOPOL (854) in 6mm thickness  
POLYSPORT STUCCO 950 0,7-0,8
POLYSPORT PU 951  2-2.3
POLYSPORT MAT 952  0.15-0.20 
For total thickness 9 mm:   PU FLEX 140   0,7-0,8 
ISOPOL (854) in 7mm thickness   
POLYSPORT STUCCO 950  0,7-0,8 
POLYSPORT PU 951  2-2.3
POLYSPORT MAT 952  
0.15-0.20
For total thickness 10 mm:   PU FLEX 140   0,7-0,8
ISOPOL (854) in 8mm thickness    
POLYSPORT STUCCO 950 
0,7-0,8
POLYSPORT PU 951 
2-2.3
POLYSPORT MAT 952  0.15-0.20 
For total thickness 12 mm:   PU FLEX 140   0,7-0,8 
ISOPOL (854) in 10mm thickness  
POLYSPORT STUCCO 950 
0,7-0,8
POLYSPORT PU 951 
2-2.3
POLYSPORT MAT 952  0.15-0.20 

RECOMMENDED SUBSTRUCTURE 

Dry asphalt or dry waterproof non-polished concrete, preferably after light grinding to provide grip and “bite”.

RECOMMENDED USES

Recommended for indoor tennis, basketball, handball, volleyball, multipurpose courts as well as other sports floors.


Click here to see the APPLICATION TIPS. 

  

   


 

For playgrounds 

 

SAFEPOL MULTICOLOR

SYSTEM SAFEPOL MULTICOLOR 859 IN THICKNESS 4cm 
  Material Consumption kg/sq.m.
MIXTURE FOR FIRST LAYER SAFEPOL 3cm 
SAFEPOL
Consumption: 5,5
kg/cm/m2
16,50
MIXTURE FOR LAST LAYER SAFEPOL MULTICOLOR 1cm 
SAFEPOL MULTICOLOR: 
Consumption: 8kg/cm/m

8,00
POLYURETHANE PRIMER
for safepol multicolor 870

Consumption: 400gr/m2 for two coatings 0,40 
 SYSTEM SAFEPOL MULTICOLOR 859 IN THICKNESS 5cm 
MIXTURE FOR FIRST LAYER SAFEPOL 4cm 
SAFEPOL
Consumption : 5,5
kg/cm/m2 
22,00 
MIXTURE FOR LAST LAYER SAFEPOL MULTICOLOR 1cm 
SAFEPOL MULTICOLOR :
Consumption: 8kg/cm/m
8,00
POLYURETHANE PRIMER
for safepol multicolor 870
 
Consumption: 400gr/m2 for two coatings 0,40 

 

RECOMMENDED SUBSTRUCTURE

 

Cement-based dry waterproof substrates, or asphalt surfaces or clean gravel.


RECOMMENDED USES

Recommended for final coating of outdoor tennis, basketball, handball and volleyball courts, as well as other sports floors.

Click here to see the APPLICATION TIPS.  

  


 

 

 

For all the above-mentioned systems, you can find detailed application tips in each section, helping you visualize their application in a more precise way.